We are manufacturer and exporter Precipitated Silica Powder of various grades specific to various industries in Gujarat, India. Following precipitated silica powder grades are available for Indian supplies:

FIL T-250 (Grade: Detergent/Pesticide)

1. Appearance White Free Flowing Powder
2. Packing 20 Kg. / 25 Kgs.
3. pH (5 % w/v) Aq. Sus. 6.5 to 7.5
4. L.O.D. At 110 °C 2 hrs. 5.0 % ( Max )
5. Moisture Content ( at 105 °C for 2 hr ) 6.0 % ( Max )
6. Bulk Density Before Tapping – Gm/ml, 0.08 max.
7. Bulk Density After Tapping – Gm/ml, 0.11 max.
8. Loss on Ignition (at 1000 °C for 2 hrs.) 6.0 % ( Max )
9. SiO2 on Anhydrous Basis 98.0 % ( Min )
10. Iron Content 200 PPM max.
11. Other Soluble Salt 1.0 % ( Max )
12. Residue on 325 Mesh ( Wet Sieving ) 2.0 % ( Max )
13. Water Absorption 250 ( Min )

Applications:
Pesticides : used as a carrier for converting liquid pesticides into water like formulation of Acephate 75 % Sp, wettable sulfur and many more product
formulation.
Detergents : As a process aid

FIL T-300 (Grade:
Rubber / Tyre) Eq. to Grade of R-VN3)

1. Appearance White Free Flowing Powder
2. Packing 20 Kg. / 25 Kgs.
3. pH (5 % w/v) Aq. Sus. 6.5 to 7.5
4. BET surface area 160-190 m2/gm
5. Moisture Content ( at 105 °C for 2 hr ) 5.0 % ( Max )
6. Bulk Density Before Tapping – Gm/ml, 0.10 max.
7. Bulk Density After Tapping – Gm/ml, 0.15 max.
8. Loss on Ignition (at 1000 °C for 2 hrs.) 6.0 % ( Max )
9. SiO2 on Anhydrous Basis 98.0 % ( Min )
10. Soluble Salt 2.0 % ( Max )
11. DBP Oil Absorption 230% ( Min )

Applications:

• Improves rolling resistance, wet traction & other dynamic properties.
• Give re-inforcing properties to tyres
• Improves tear resistance and abrasion resistance
• Give re-inforcing properties to tyres
• Provides higher tensile strength , long life and durability.

FIL T-200 (Footwear & Conveyor Belts)

1. Appearance White Free Flowing Powder
2. Packing 25 Kgs.
3. pH (5 % w/v) Aq. Sus. 6.5 to 7.5
4. BET surface area 160-190 m2/gm
5. Moisture Content ( at 105 °C for 2 hr ) 5.0 % ( Max )
6. Bulk Density Before Tapping – Gm/ml, 0.10 max.
7. Bulk Density After Tapping – Gm/ml, 0.15 max.
8. Loss on Ignition (at 1000 °C for 2 hrs.) 6.0 % ( Max )
9. SiO2 on Anhydrous Basis 98.0 % ( Min )
10. Soluble Salt 2.0 % ( Max )
11. DBP Oil Absorption 230% ( Min )

Applications:
Provides increase abrasion resistance and strength.
Provides superior durability and resilience and improved modulus.

FIL T-150 (ANTICAKING/ FREE FLOW)

Sr.	Description of Test	Specification  / Lmited
1	Appearance	White Free Flowing Powder
2	Packing	20 Kg
3	pH (5 % w/v) Aq. Sus.	6.5 to 7.5
4	L.O.D. At 110 °C 2 hrs.	5.0 % ( Max )
5	Moisture Content ( at 105 °C for 2 hr )	5.0 % ( Max )
6	Bulk Density Before Tapping Bulk Density After Tapping	Gm/ml, 0.08 max. Gm/ml, 0.10 max.
7	Loss on Ignition ( at 1000 °C for 2 hrs.	6.0 % ( Max )
8	SiO2 on Anhydrous Basis	98.0 % ( Min )
9	Iron Content	200 PPM max.
10	Other Soluble Salt	1.0 % ( Max )
11	Residue on 325 Mesh ( Wet Sieving )	2.0 % ( Max )
12	Water Absorption	250 % ( Min. )

END PROPERTIES:

• Enhance free flowing characteristics in salt/powdered food
• Prevents caking and provides free flow

FIL P (Colloidal Silicon Dioxide)

Sr	Description of Test	Specification
1	Appearance	White Fine light amorphous codourless powder
2	Packing	10 Kgs.
3	pH (5 % w/v) Aq. Sus.	3.5 to 5.0
4	BET Surface area	170-180 m2/gm
5	Bulk Density Before Tapping Bulk Density After Tapping	Gm/ml, 0.04 max. Gm/ml, 0.08 max.
6	Loss on Ignition ( at 1000 C for 2 hrs. on anhydrous basis)	5.0 % ( Max )
7	SiO2 on Anhydrous Basis	98.0 % ( Min )
8	Chloride	Not more than 250 ppm
9	Total Heavy Metal ( as Pb )	Not more than 25 ppm
	Behaviour with Water	Hydrophilic

END PROPERTIES:

• Used as economic replacement of fumed silica.
• Acts as rheology controller & viscosity enhancer in creams
• Used in various pharmaceutical formulation( Tablet and powder ) and syrup suspension.

FIL T -160 (Animal Feed)

Sr.	Description of Test	Specification  / Lmited
1	Appearance	White Free Flowing Powder
2	Packing	25 Kg
3	pH (5 % w/v) Aq. Sus.	6.5 to 7.5
4	BET Surface area	160-200 m2/gm
5	Moisture Content (at 1050 C for 2 hr )	6.0 % ( Max )
6	Bulk Density Before Tapping Bulk Density After Tapping	Gm/ml, 0.15 max. Gm/ml, 0.20 max.
7	Loss on Ignition (at 10000 C for 2 hrs.	6.0 % ( Max )
8	SiO2 on Anhydrous Basis 98.0 % (Min	98.0 % ( Min )
9	Soluble Salt	1.0 % ( Max )
10	DBP Oil Absorption (cc/100gm)	250 % ( Min )
11	Microbiological Analysis 1) TVC 2) Y & M	NMT 1000 cfu/gm NMT 100 Cfu/gm

END PROPERTIES:

• To improve the processing packing and stability of animal feed
  additives.Two
• Converting liquid ingredients to free flowing powder.

FIL T -130 (Dental Grade)

Sr.	Description of Test	Specifications
1	Appearance	White Free Flowing Powder
2	Packing	20 Kg / 25 Kg
3	pH (5 % w/v) Aq. Sus.	6.5 to 7.5
4	BET Surface area	160-200 m2/gm
5	Moisture Content ( at 1050 C for 2 hr )	6.0 % ( Max )
6	Bulk Density Before Tapping Bulk Density After Tapping	Gm/ml, 0.08 max. Gm/ml, 0.13 max.
7	Loss on Ignition (at 10000 C for 2 hrs.on Anhydrous Basis	6.0 % ( Max )
8	SiO2 on Anhydrous Basis 98.0 % ( Min )	98.0 % ( Min )
9	Soluble Salt	1.0 % ( Max )
10	Refractive Index	1.4350-1.4600
11	Residue on 325 Mesh ( Wet Sieving )	2.0 % ( Max )
12	Total Heavy Metal ( as Pb )	Not more than 10 ppm
13	Linseed Oil Absorption	250 – 300 (cc/100 gm)
14	Microbiological Analysis – TVC  Microbiological Analysis – Y and M	NMT 1000 cfu/gm  NMT 100 Cfu/gm

END PROPERTIES:

• Gives thicking effect to opaque & gel toothpaste formulation

We are one of leading manufacturer of Precipitated Silica Powders in India. Please feel free to contact regarding above products.